Description
The American Original Series 50s Strat for left-handed players is now in stock.
This model reproduces the typical specifications of the 50s Stratocaster in every detail, while combining the playability demanded by modern players.
From the potting (waxed) Pure Vintage’ 59 single coil Stratocaster pickups, Formvar coated coil wires to the cross covered output wires, fiber bobbins and Alnico 5 magnets, the The specs have been faithfully reproduced.
The thicker Soft V neck shape is perfect for chord playing, and the 9.5″ R fingerboard offers modern playability.
Vintage tall frets, original model body radius, vintage-style hardware including 6-point synchronized tremolo bridge, vintage-style hard case, and lacquer finish for superb tone and exquisite aging, You can enjoy the vintage feel.
Discoloration due to paint reaction can be seen on the body end and body back.
There are many minor scratches and dents overall, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: V1747317
Year of manufacture: 2017
Country of manufacture: USA
Case: Original hard case
Accessories: arms, bridge cover
Weight: 3.42kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 23.2mm
Neck thickness near 12th fret: 25.5mm
SCALE: 648mm (25.5″)
RADIUS: 241mm (9.5″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs, etc.)
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
V1747317
Year of manufacture
2017
Country of Manufacture
United States of America
Case.
Genuine hard case
Accessories
Arm, bridge cover
Weight
3.42kg
Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
42.5mm
Neck thickness near 1st fret
23.2mm
Neck thickness near 12th fret
25.5mm
Scale
648mm (25.5″)
RADIUS
241mm (9.5″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
