Description
Les Paul standard type made by Burny.
Despite being a cost-effective and reasonable series, it has a set neck construction with a maple top and mahogany back, allowing you to enjoy the sound of a real Les Paul type.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.
There are some parts have some chinks, and there is a small paint chip near the body top jack.
There is a ding with a paint dent near the center of the body back, but other than that, it is in good condition with only minor scratches.
Item rank: B+ (Good)
Year of manufacture: Made in 2015
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Soft case / Non-genuine
Weight 3.96kg
Serial FG15070172
Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|24.4mm
SCALE|628mm (24.75″)
RADIUS|356mm (14″)
Strings at setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs Specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut Width
43.5mm
Neck Thickness (near 1st fret)
21.0mm
Neck Thickness (near 12th fret)
24.4mm
Scale
628mm (24.75″)
RADIUS
356mm (14″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
