Description
Fender Japan 1997-2000 Jaguar in stock!
Alder / Maple body / Rosewood neck / Fingerboard construction.
22-fret short scale neck with unique control system and 2 original Alnico single coil pickups.
Front pickup: preset/1 volume, front pickup: preset/1 tone, front pickup: on/off switch, rear pickup: on/off switch.
It consists of a high cut switch, master volume, and master tone.
Overall, there are scratches, dents, paint chips, and other signs of use. The bridge has been replaced.
There are numerous paint chips, dents, and scratches on the sides of the body, and some scratches on the fingerboard around the 18th fret.
There are cracks on the top of the body and near the bridge, scratches on the pickguard, and rust and tarnish on metal parts.
The neck is slightly wavy, but there are no problems with normal use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: CIJ O084437
Year of manufacture: 1997-2000
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.74kg
Truss Rod: Note: Neck is currently fine at the limit of the rod
Fret Remaining: Note: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.1mm
SCALE: 610mm (24″)
RADIUS: 184mm (7.25″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sponge replacement under pickups
Specs: Pieces
Item Rank
B: Fairly scratched and used, but no problem for normal use.
12 months old
Serial number
CIJ O084437
Year of manufacture
1997-2000
Country of manufacture
Japan
Case
non-genuine soft case
Accessories
Arm
Weight
3.74kg
Truss Rod
Note: Neck currently in good condition at rod limit
Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
42.5mm
Neck thickness near 1st fret
20.8mm
Neck thickness near 12th fret
23.1mm
Scale
610mm (24″)
RADIUS
184mm (7.25″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sponge replacement under pickups
