Description
Maple top, mahogany back, mahogany neck, rose fingerboard, and 490R/498T pickups.
The sound is thick and core like a Les Paul, and it is a perfect sound for rock, but it is also very sweet in clean mode, and can be used in a wide range of genres.
There is a broken repair mark on the back of the neck at the base of the head, but it has been properly repaired, so there is no problem in playing it.
* The neck has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, and frets adjusted after arrival at our store, so it is in good playing condition.
There is a neck break repair mark.
Overall, there is a lot of clear paint burn and reaction, and there are many buckle scratches on the body back.
There are other slightly stronger signs of use such as scratches and small dents.
Item rank: B+ (Good)
Year of manufacture: 2000
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Hard case / Genuine
Country of Origin USA
Weight 4.44kg
Serial 00626397
Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|24.0mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.3mm
Neck Thickness (near 1st fret)
21.0mm
Neck Thickness (near 12th fret)
24.0mm
Scale
628mm (24.75″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
