Description
The blackGRW2018509 Rackworks Hinged Wall Mounted RackfromGator Casesfeatures a hinged back, double section, welded frame construction. The rack consists of 18 gauge removable side panels with spring latches and an 18 gauge SPCC cold-rolled steel top and bottom. There are 11 gauge drilled and tapped front and rear rack rails, and the top is perforated to accommodate a fan. The rack U number is printed on the rack rails, and there is a door with toughened glass, vented sides, and a spring loaded push and turn locking system. There are 10/32 rack screws, a 5/8″ knockout design for a VHF/UHF antenna, and a 10 x 10″ rear access knockout for cables. Additional cable entry knockouts on the top and bottom include knockouts with 1/2″, 5/8″, 1.0″, and 1 1/2″ dimensions.
- Front door features toughened glass with vented sides, and spring loaded push and turn locking system
- Hinged back, double section, welded frame construction
- 18 gauge removable side panels with spring latch
- 18 gauge SPCC cold-rolled steel top and bottom
- Perforated top to accommodate fan
- 11 gauge drilled and tapped front and rear rack rails
- Rack U number printed on the rack rails
- 10/32 rack screws
- 1/2″, 5/8″, 3/4″, 1.0″, and 1 1/2″ cable entry knockouts on top and bottom
- 5/8″ knockout design to be used for VHF/UHF antenna
- 10 x 10″ rear access knockout for cable entry
